|
o |
 |
 |
 |
|
Phone: 336-973-3399 |
Custom hand guns |
Cell: 336-902-0222 |
|
Click on Image
for larger view Custom 1911 45 Acp |
|
 |
 |
 |
 |
 |
|
I built this pistol from the frame up. It is a Essex frame,
the slide and barrel are from Smith and Wesson. The trigger,
sear, and disconnector are Ed Brown. The Ambi. thumb safety,
slide stop, and clips are Chip McCormick. The trigger and
grip safety are Kings. I also used a Barrett mag. guide and
Pearce grips. It took many hours of fitting and milling
parts including the frame. After fitting the slide to the
frame I opened the slide stop area of the frame and then
milled the top of the slide flat. It has a three pound
trigger pull with no creep. Bomar target sites make it
deadly accurate! Of course there is so much more to the job
but it's impossible to cover everything. |
|
 |
 |
 |
|
Three
pictures of my latest 1911 45ACP pistol that I just
completed. |
|
 |
 |
| These pictures
of the custom built Ruger go on the same link. The gun has
been built from the frame up also, taking a 22/45 gun and
putting it on an older Mk II frame. The hammer, sear,
trigger, and just about every other component has been
modified or changed. Most parts are Volquartsen. It is very
accurate and has a 2 and a half pound trigger pull. |
|
 |
 |
| These two
pictures are the Browning High Power that I have completely
disassembled and am going to modify and smooth the action.
When done, it will be a totally different gun internally and
externally as well. |
|
 |
 |
| Here is a
Smith & Wesson 41 Mag custom tuned action and Leuplod Red
Dot Scope. We have been doing more and more revolver work
lately. |
|
_small.JPG) |
_small.JPG) |
_small.JPG) |
_small.JPG) |
| Here is a
Performance Center 44 Mag. being shown by my youngest son
Shane. I was never really a fan of the 44 until this gun
came along.. |
|
|
 |
 |
 |
 |
|
1911 in 38 Super built with a
NCG Super Gas top end. The gun has virtually no recoil and
is smooth as silk. The only down side to it is the expense
NCG charges for their components |
38 Special built on a S&W
frame |
|
 |
 |
| 1911 built
with Caspian frame and 6 inch slide |
 |
 |
 |
Custom built
Smith & Wesson 44 Mag. This turned out to be as accurate to
shoot as it was beautiful to look at.
I'm kind of sorry I sold it |
|
 |
 |
| Smith & Wesson
357 Mag eight shot |
|
 |
 |
| Smith & Wesson
X Frame 460 Mag also shoots 454 Casull and 45 Long Colt |
|
 |
 |
| SmithSmith & Wesson
617 22 short, long & long rifle 10 shot...I take this gun
whenever I go for a ride in the woods behind the house, a
personal favorite |
|
 |
 |
| 1911 built in
June 2009 |
 |
 |
 |
Final fitting
of slide to frame using compound, a leather mallet, and a
lot of beating
Custom built Smith & Wesson 686 put together with the best
of old school parts and one of the nicer barrels S&W has
produced lately, Basically the best of both worlds. |
|
 |
 |
Custom built
Smith & Wesson 686 put together with the best of old school
parts and one of the nicer barrels S&W has produced lately,
Basically the best of both worlds. |
Top
of Page
|
 Copyright
© 2005 by Precision Specialties. All rights reserved.
Revised:
06/18/17. |
Need a Website
|
|
|
.JPG)
.JPG)
.JPG)
.JPG)
